Accessories Primus²

All PRIMUS² lasers are fitted with the Quick-Fix adapter
in addition to the standard 5/8" connecting thread. This
means that the laser can be attached to and removed
from the PRIMUS² tripod in seconds using the integrated
Quick-Fix system or a tripod retrofitted with Quick-Fix.
To attach or remove it, simply move the lever.
That's it.

Ref.-No. 572 112

Sturdy aluminium tripod with integrated Quick-Fix locking
system.

Ref.-No. 200 202

Technical data:
Min. effective height	approx 1.07 m
Max. effective height	approx. 1.71 m
Retracted length	approx. 1.15 m
Weight	approx. 5.00 kg
Tripod head	Quick-Fix,ø 140 mm

Telescopic sight with laser sighting mechanism for exact
axis alignment.Suitable for use with the PRIMUS² H2N
and PRIMUS² HVA2N dual slope lasers.

Ref.-No. 461 096

• PRIMUS² tripod with integrated Quick-Fix release,
  working range 1.07 m to 1.71 m
  
  
• Flexi Rod with universal adapter and carrying bag

Ref.-No. 200 350

• Elevating tripod, working range 0.80 m to 2.76 m
  
  
• Flexi Rod with universal adapter and carrying bag

Ref.-No. 210 350

• Elevating tripod, working range 0.78 m to 2.03 m
  
  
• Flexi Rod with universal adapter and carrying bag

Ref.-No. 210 351

Additional battery compartment for PRIMUS² models.
(Without batteries)

Ref.-No. 461 097

Rechargeable battery add-on set for all PRIMUS² models.
Incl. charger.

Ref.-No. 461 098

The Facade Construction Adapters are fastened to the
wall and horizontally aligned with the aid of integrated
bubbles. Thanks to the mm graduations provided on
the crosspieces, rotating lasers and laser receivers can
be conveniently positioned at the required distance
from the wall. The new Facade Construction Adapters
have been optimally matched to the fully automatic
PRIMUS² HVA rotating laser with AutoAlign function
and to the COMMANDER² laser receiver, and provide
in combination with these instruments a professional
and complete system for facade construction.

Sturdy aluminium facade constructionadapter.
Sliding runner with tripod headand 5/8” connecting
thread. Adjusting range approx. 450 mm. Three
adjusting screws allow exactalignment of the facade
construction adapter.

Features:

• Distance of laser plane from the wall:
  Min. appr. 45 mm, max. appr. 490 mm
  
• Tube bubble
  
• 3 adjusting screws for precise
  alignment of the laser level
  
• mm and cm graduation on the support

Ref.-No. 461 046

Sturdy aluminium facade constructionadapter.
Sliding runner for accommodatingthe COMMANDER²
laser receiver.Adjusting range approx. 490 mm.
Three adjusting screws allow exactalignment of
the facade constructionadapter.

Features:

• Minimum 0-marke 60 mm away from
  the wall
  
• Maximum 0-marke 490 mm away
  from the wall
  
• Tube bubble
  
• 3 adjusting screws for precise
  alignment of the laser level
  
• mm and cm graduation on the support

Ref.-No. 461 056

With the tilt adapter, inclines of up to 90° can be set
manually.
Quick adjustment with 6 stages and additional fine
adjustment. Scale with % and ° units. Incl. circular
level, built-in sighting device, 5/8" connecting thread
and quick-fix system for lasers of the PRIMUS² series.

Ref.-No. 461 047

The mini-flexi rod allows distances in facade construction
to be measured quickly and easily.
The laser receivers of the COMMANDER² series and the
ACCEPTOR^pro can be fastened to the mini-flexi rod.
Measurement range: 65 mm to 280 mm

Ref.-No. 461 048

On modern construction sites the batter board is
increasingly being supplanted by a rotating laser.
The laser is, in vertical operation, placed on a batter
board holder fastened to the batter board by a clamping
screw. The batter board holder is provided with a
turntable allowing rough alignment of the rotating
laser.
The laser receiver with the receiver holder is clamped
on the opposite side of the batter board.
Thanks to the AutoAlign function, the laser plane
automatically aligns with the laser receiver
COMMANDER² in the case of the PRIMUS² HVA
and PRIMUS² HVA2N models.
Furthermore, the laser plane is automatically monitored
and if necessary corrected by the AutoAlign function.

Sturdy aluminium batter board holderwith four clamping
screws.
Suitable for use with rotating lasers from the PRIMUS²
series.
Clamping range of screws: 15 mm to 88 mm

Ref.-No. 461 045

Sturdy aluminium batter board holderwith one clamping
screw.
Suitable foruse with ACCEPTOR^pro and COMMANDER²
laser receiver.
Clamping range of screws: 18 mm to 94 mm

Ref.-No. 461 055